Detector production is discontinued and is replaced by ST-111. Press a link below to continue to ST-111description.

PURPOSE

ST 110 is designed for detecton and localization of radio-wave radiation devices (RD) which are designed or used for unauthorized data transfer via radio channel.

These facilities include the following:

• Radio-microphones (BUGs) ;
• telephone radio retransmitter (TAP);
• wireless stethoscope;
• Video-cameras with radio channel for data transfer;
• Radio beacons for people, vehicles or cargos tracking systems;
• Mobile phones and radio modems of GSM, DECT standards;
• Data transmission devices of BLUETOOTH and WLAN standards.

Principle of operation of ST 110 is based on broadband detection of electrical field

ST 110 operates in two main modes: SEARCH and MONITORING.
Additional modes include: LOG VIEW, OSCILLOSCOPE and RECORDER.

SEARCH MODE

This mode is intended for search and detection of RD location. Usage of this mode is based on visual estimation of signal level on 32-segmental scale. Additionally separate indication of continuous and pulse signals,  identification signals of GSM, DECT, BLUETOOTH, WLAN standarts and stable signal frequency are used.

The possibility of acoustic control by means of headphones is provided.

32-segmental indicator of average power of radio-frequency radiation source (is pointed on continuous output radio transmitters).   32-segmental indicator of impulse component level of radio signal (is pointed on impulse radio transmitters, such as GSM, DECT etc.).   Sensitivity of the indication scales («L» – low, «M» – medium, «H» – high).   Frequency bands («B1», «B2») LOW PASS FILTER "LPF" ("F") /short-period indication of set zero scalelevel («ZERO»);   Current value of impulse/constant component level, comparing with zero level, dB;   Value of periodic signal frequency, MHz   Identified data transfer standards (GSM, DECT, DECT BASE, BLUETOOTH or WLAN   Change in time of signal level with dominant constant component   Change in time of signal level with dominant impulse component   Current value zero level of impulse/constant component, dB

MONITORING MODE

This mode is desined for independent operation of ST110 on preset conditions. The information about detected signals is saved by means of non-volatile memory of the device (9 banks, each for 999 events).

Scheduled work operation is also provided.

Indicators of RF transmitter signal level   Graphic labels of alarm threshold levels   Sign of no permission for recording in EVENT LOG   5-second interval countdown   Current value of impulse/constant signal component level, comparing with absolute level, dB   Value of the alarm threshold levels of impulse/constant signal, dB

LOG VIEW MODE

This mode is intended for viewing the log of events taking place in the result of the unit running in MONITORING mode.The classification of the events by time, duration or signal level is provided.

Number of viewed bank /Number of banks in action   Number of viewed event/Number of events in bank   Frequency range, in which the alarm happened (B1: 50-2500 MHz, B2: 2500-7000 MHz)   Signal properties in the moment of alarm threshold excess

OSCILLOSCOPE MODE

ADDITIONAL POSSIBILITIES

SPECIAL "ST110 ANALYZER" SOFTWARE

The software is intended to:

• time graphic display of data and the results of operation of the ST 110;
• the ST 110 remote full control using PC;
• extended settings assignment for MONITORING mode;
• load and display textual and graphical information of the operation of the ST 110 in MONITORING mode (Event Log);
• firmware updating.