MENU
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
previous arrowprevious arrow
next arrownext arrow
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
ARCAM SP-102 camera detector
previous arrow
next arrow
 

ARCAM design purpose

ARCAM is designed for remote detection and localization of powered hidden video cameras that are installed outside, indoors, concealed as objects or body-worn. ARCAM is able to detect both analogue and digital cameras regardless of concealment and video transmission methods. ARCAM detects both common wired and wireless cameras, as well as cameras that are storing data on an internal memory bank, which gives ARCAM an obvious advantage over other instruments for camera detection, such as Optical Detectors or NLJDs. ARCAM does not require the operator to thoroughly and slowly search the entire premises or a person, it takes seconds for ARCAM to tell if there are any cameras which could then be easily localized.

ARCAM operating principle

ARCAM's operating principle is based on detection and analysis of specific parts of electromagnetic spectrum in order to find stray emission (spurious signals), that is unique for video camera circuits. Upon detection, such signals are then evaluated and correlated with the spectral "images" database that is stored in ARCAM's memory.
 
Note! Stray emission from some digital circuits commonly used in portable media players, laptops, automobile on-board media systems, et-cetera, can match camera "images". To remedy such false positives ARCAM has a function of "white listing" localized signals that were identified by the user as non-threats. 

ARCAM delivery set:

  1. ARCAM detector (SEL 102)
  2. Antenna
  3. Power supply adapter
  4. USB cable
  5. Stylus (for touch screen calibration)
  6. User's Manual (UM)
  7. Hard case 

ARCAM technical characteristics 

Receiver sensitivity -148 dBm
Dynamic range 80 dB
Detection time (average) 3 s
Analysis time (average) 10 s
Antenna type whip, broadband
Screen type colour LCD
Continous operating time 4 hours
Battery full recharge time 3.5 hours
Battery Li-Pol, 4100 mAh
Physical dimensions 85 x 140 x 30 mm
Weigth (with antenna) not more than 300 g
Operating temperatures from -10 ℃ to +40 ℃

Latest news:

  • iProtect-1217-detector.jpg
    Phone Safe Summit
    Date: 2024-07-05
    One of the potential leakage channels is the phone's microphone being able to pick up surrounding acoustics with a high sensitivity. The PHONE SAFE SUMMIT has been developed by information security professionals to protect against this exact type of threat.
    Link to complete description: Phone-Safe-Summit description
     

  • WEGAi
    WEGAi
    Date: 2024-06-28
    WEGAi - pinhole camera detector has been added to our website
    Link to complete description: WEGAi description
     

  • iProtect-1217-detector.jpg
    iProtect-1217
    Date: 2024-06-28
    iProtect-1217 - detect GSM, 3G, 4G/LTE and 5G
    Link to complete description: iProtect-1217 description

  • iProtect-1217-detector.jpg
    Protect-1207i
    Date: 2024-06-28
    Protect-1207i - detect GSM, 3Gand 4G/LTE
    Link to complete description: Protect-1207i description

  • Website Update
    Website Maintenance
    Date: 2024-05-22
    Website is under maintenance, contact forms might not work. Please write all your inquiries directly by email This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Milopol TSCM
    Milipol 2017
    Date: 2017-11-15
    We are proud to announce we are participating at the exhibition MILIPOL 2017 Paris 21-24th of November
    Our booth number A061 
    Most important products will be demonstrated including:
    • ST-121 test signal generator for TSCM training.
    • ST-167 with WiFi module and relay contacts.
    • ST-154 multizone spectrum monitoring.
    • ST-171 RF jammer detector.
    • ST-131 Piranha II multifunction TSCM device.
    • Lornet and Cayman Series NLJD.
    • CGU-OCD20 laser camera detector.
    • Voron, Optic-2 camera detectors.
    • And other equipment
     

  • ST-121 TSCM training test signal generator
    GSM, 3G, 4G and GPS jammer detector.
    Date: 2017-10-25
    ST-171 is intended to detect GSM, 3G, 4G and GPS jammers for theft prevention in parking lots, offices and private territories. Detection of cellular or GPS receivers jammers in cars moving along a highway, street etc.
    Link to complete description: ST-171 description
     

  • ST-121 TSCM training test signal generator
    Test signal simulator for TSCM training. ST-121
    Date: 2017-10-10
    Device is intended for simulation of test signal and is a handy tool to use in TSCM training or laboratory measurements.
    Signal simulator is intended to imitate operation of most common transmitting devices, such as:
    • RF transmitters in frequency range 100-6000 MHz
      Modulations: AM, FM, Sinusoidal, DSSS, FHSS, PULSE;
    • Information transmission over 220V mains lines;
    • Transmission over low-voltage, phone lines;
    • Optic channel, IR emission;
    • Ultrasonic sound;
    Link to complete description: ST-121 description
     

  • ST-154 multizone remote RF spectrum monitoring device
    ST-154 Distributed multizone RF monitoring
    Date: 2017-09-01
    ST-154 is a distributed, multizone RF spectrum monitoring system. Remote modules are deployed around the premises and provide 24/7 real-time RF spectrum monitoring in 25-6000 MHz frequency range. Most common wireless and cellular communication signals are identified. Events recording, review and filtering are possible. System setting are highly customisable.
    Spectrum information and potentially dangerous events are transmitted in real time by Ethernet or WiFi to central monitoring station. Up to 128 remote monitoring points. Signal localisation is possible by comparing real-time data from several remote ST-154 monitoring modules.
    Link to complete description: ST-154 description
     

  • ST-300-Spider-wire-lines-analyser
    SPIDER cable lines analyser
    Date: 2017-09-01
    SPIDER wire lines analyser can detect tapping and information gathering by surveillance devices connected to landline phone lines, 220V mains, low voltage lines and etc.
    Link to complete description: SPIDER
     

  • OPTICAL Camera Lenses Detector
    OPTICAL Camera Detector
    Date: 2017-08-01
    Optic-2 binocular camera detector with 6.5x magnification, dioptric adjustment, greed and red LED diodes. Available in stock.
    Complete information link: Optic-2 camera detector
     

  • Cayman 401 403 detector
    Cayman 403 - non linear junction detector
    Date: 2016-08-01
    New model of non linear junction detector Cayman 401 also known as Cayman 403 is available in stock.
    Complete information link: CAYMAN 401 (403)
     

  • Cayman 400 402
    Cayman 402 - non linear junction detector
    Date: 2016-08-01
    New model of Cayman 400 also known as Cayman 402 has following advantages:
    • Improved antenna constructions ensures higher selectivity of the device.
    • Decreased weight and size.
    • Simplified control and indication system.
    • New type of batteries - easy to find and purchase in the market 3,7 volt (type 18650).
    • More ergonomic design.
    Complete information: CAYMAN 400 (402)