ST-111 RF signal, GPS trackers and bugs detector
ST-111 detector description:
ST-111 is designed for detecting and locating of radio transmitting bugging devices, such as:
- GPS trackers while they transmit object coordinates to recipient;
- GSM bugs;
- Wireless, WiFi video cameras and covert surveillance devices;
- Unauthorised WLAN and DECT devices.
The principle of ST 111 operation is based on broadband detection of electrical field ST 111 operates in two main modes: SEARCH and MONITOR. Additional modes include LOG COLLECTION, LOG VIEW, OSCILLOSCOPE and RECORDER.
ST-111 key features:
- Separate indication of analogue and pulse signals;
- Display and identification of GSM (2G), DECT, WLAN (2.4GHz) signals;
- Frequency meter;
- Oscilloscope;
- Timing diagram;
- Special software "ST110 ANALYZER" included with the delivery set;
- 24/7 monitoring;
- Log of events.
Features of included ST-111 analyser software for PC:
- Time graphic display of data and the results of operation of the ST 111;
- Full remote control from PC;
- Extended settings assignment for MONITOR mode;
- Load and display textual and graphical information of the operation of the ST 110 in MONITOR mode (Event Log);
- Firmware updating over the internet.
Delivery set:
- Main processing unit - 1pcs;
- RF antenna - 1pcs;
- USB cable - 1pcs;
- Power supply and charger adapter - 1pcs;
- USB flash drive with PC software - 1pcs;
Options, to be ordered separately:
- Directional antenna;
- Custom made, Pelican shockproof case.
ST-111 Search Mode
This mode is intended for search and detection of RD. Usage of this mode is based on visual estimation of the signal level on the 32-segmental scale. Additionally, a separate indication of continuous and pulse signals, identification signals of GSM, DECT, BLUETOOTH, WLAN standards and stable signal frequency are used.
The possibility of acoustic control by means of headphones is provided.
|
![]() |
ST-111 RF monitoring mode
This mode is designed for independent operation of ST110 on preset conditions. The information about detected
signals are saved by means of a non-volatile memory of the device (9 banks, each for 999 events).
signals are saved by means of a non-volatile memory of the device (9 banks, each for 999 events).
Scheduled work operation is also provided.
|
![]() |
ST-111 Event log view mode
This mode is intended for viewing the log of events taking place in the result of the unit running in MONITOR mode.The classification of the events by time, duration or value of the signal level is provided.
|
![]() |
ST-111 Oscilloscope mode
This mode shows detected signal oscillogram.
|
![]() |
ST-111 technical characteristics:
Frequency range No. 1, MHz | 50-2500 |
Frequency range No. 2, MHz | 2500 - 7000 |
Threshold sensitivity, dBm |
-75 (50 МHz)
-70 (1500 МHz) -50 (2500 МHz) |
Threshold sensitivity, W/cm2 | 2x10-10 |
Dynamic Range of indication -range No. 1, dB -range No. 2, dB |
55
30
|
Frequency range of frequency meter, MHz | 50-2500 |
Sensitivity of frequency meter, dBm |
-35 (50 МHz)
-50 (500 МHz) -20 (2500 МHz) |
Frequency measurements accuracy, % | 0.005 |
Built-in power supply battery | Li-pol 3.6V |
Consumption current, max, mА | 110 |
Dimensions, mm | 90 x 54 x 21 |
Gross weight, kg | 0.25 |