ST-165 Cell Phone Detector

Posted in RF Detectors

RF detector ST-165 has been discontinued and replaced by ST-167. Please visit ST-167 page for latest information. 

ST 165 is designed for detection and identifying mobile radio transmitters of cellular communications standards (mobile phones and modems of GSM 900, 1800, UMTS), wireless data transmission (WI FI and BLUETOOTH) and cordless phones (DECT). Additionally indication of base stations power signal strength and data exchange intensity is provided. From now forward all of specified units will be unified as DRTD – Digital Radio Transmitting Devices.

ST 165 operates on the basis of direct-conversion receiver. To detect signals, the ST 165 scans a series of frequency ranges of the known transmission standards. The user can set up the detection threshold and the number of desired frequency bands. Signals identification is performed on basis of analysis of detected signals time parameters.

AUTOMATIC MODE

This mode is intended for DRTD automatic detection when it exceeds the operation threshold set by user. Signal data are logged. Scheduled work is provided.

Short names of digital data transmission standards chosen by user for the work. If the alarm threshold is execeed then  the background of the name is highlighted red. 9 GSM 900 18 GSM 1800 3G 3G (UMTS) W Wi-Fi (WLAN) BT BLUETOOTH DT DECT 2.4 devices, other than WLAN and BLUETOOTH, operating at 2.4-2.485 GHz range (for example, wireless surveillance cameras, etc.). 32-segmental indicator signal level meter. Signal level numerical value, dB. Names of digital data transmission standards

MANUAL MODE

This mode is intended for detection of

• location of DRTD;
• threshold levels value for following use in AUTOMATIC MODE.

In this mode indication BASE STATION signals level is provided.

Change in time of signal level (TIME DIAGRAM)

LOG VIEW

This MODE is desined for viewing the log of events . Time of event, its duration, type of event, signal strength are displayed.

Detected standard Threshold of ALARM Information on event Viewed event No./Amount of events in the bank Viewed bank No./Amount of used banks

ADDITIONAL POSSIBILITIES

• Adjustment on "local" frequencies of standard UMTC immediately by user
• Built-in Relay (terminals on the external port) Extends the functionality of the ST 165 to remotely control  jammers and additional indicators.
• SPECIAL SOFTWARE "ST165 ANALYZER"

The software is intended to:

• time graphic display of data and the results of operation of the ST 165;
• the ST 165 remote full control via ETHERNET;
• firmware updating via internet.

Print